Installing the Common USB Port Driver

This driver is required for the A-910-2.4ZB Transceiver and the T-241 Shaft data cable in order to communicate with targets via the computer’s USB port. The driver creates a virtual COM Port that is recognized by the applications as a standard serial port.

Note: You must pre-install this driver prior to connecting the device(s) to the computer through the USB port.

Installing the Driver

1. Insert the Flash drive in an available USB port..
2. Select My Computer, locate the REMOVABLE DISK icon and click to open it.
3. Select the USB Drivers folder.
4. Open the CP210x_VCP_Windows folder and select the correct system type file
   CP210xVCPInstaller_x##.exe (32bit=x86, 64bit=x64) click to initiate the installation process. The
   Install Driver dialog box displays.
5. Click Browse to select an installation folder different from the default folder (optional).
6. Click Install to continue. Once the installation is complete, the Installation Successful message Displays (see Figure 1).

Figure 1 – USB Common Driver Install